{"id":167,"date":"2026-07-31T13:44:05","date_gmt":"2026-07-31T05:44:05","guid":{"rendered":"http:\/\/www.budi-daya.com\/blog\/?p=167"},"modified":"2026-07-31T13:44:05","modified_gmt":"2026-07-31T05:44:05","slug":"how-to-store-a-25t-bending-machine-when-not-in-use-4fb1-5c5c72","status":"publish","type":"post","link":"http:\/\/www.budi-daya.com\/blog\/2026\/07\/31\/how-to-store-a-25t-bending-machine-when-not-in-use-4fb1-5c5c72\/","title":{"rendered":"How to store a 25t bending machine when not in use?"},"content":{"rendered":"

Storing a 25t bending machine properly when it’s not in use is crucial to maintain its performance, extend its lifespan, and ensure safety. As a supplier of 25t bending machines, I’ve seen firsthand the consequences of improper storage, ranging from minor mechanical problems to significant damage that can render the machine inoperable. In this blog, I’ll share some professional advice on how to store your 25t bending machine effectively. 25t Bending Machine<\/a><\/p>\n

<\/p>\n

I. Pre – storage Preparation<\/h3>\n

Before you store the 25t bending machine, it’s essential to conduct a thorough cleaning, inspection, and maintenance process.<\/p>\n

A. Cleaning<\/h4>\n
    \n
  1. Remove debris and dust<\/strong>: Use compressed air, a brush, or a vacuum cleaner to remove all the debris, dust, and metal shavings from the machine’s surface, especially in the areas around moving parts, such as the bending dies, hydraulic cylinders, and gears. These particles can cause abrasion and corrosion over time, which may lead to premature wear and tear.<\/li>\n
  2. Clean the hydraulic system<\/strong>: The hydraulic system is the heart of the bending machine. Drain the old hydraulic oil and replace it with fresh oil according to the manufacturer’s recommendations. This helps to prevent the formation of sludge and contaminants that can clog the hydraulic lines and damage the pumps and valves. Use a clean cloth to wipe the exterior of the hydraulic components to remove any oil stains.<\/li>\n
  3. Wipe the electrical components<\/strong>: Moisture and dust can damage the electrical components of the bending machine. Use a dry, static – free cloth to clean the control panel, motors, and wiring. Ensure that all electrical connections are tight and free from corrosion.<\/li>\n<\/ol>\n

    B. Inspection<\/h4>\n
      \n
    1. Mechanical inspection<\/strong>: Check all the mechanical parts of the bending machine, including the frame, bending dies, and rollers. Look for signs of wear, cracks, or misalignment. Replace any worn or damaged parts before storing the machine to avoid further deterioration during storage.<\/li>\n
    2. Hydraulic inspection<\/strong>: Inspect the hydraulic hoses, pumps, and valves for leaks, cracks, or damage. Tighten any loose connections and replace any faulty components. Check the hydraulic pressure and ensure that it is within the normal range.<\/li>\n
    3. Electrical inspection<\/strong>: Test the electrical system to make sure all the switches, sensors, and motors are working properly. Check for any loose wires or damaged insulation. Repair or replace any defective electrical parts.<\/li>\n<\/ol>\n

      C. Maintenance<\/h4>\n
        \n
      1. Lubrication<\/strong>: Apply a thin layer of high – quality lubricant to all the moving parts, such as the bending dies, rollers, and gears. This helps to prevent rust and corrosion and ensures smooth operation when the machine is put back into use.<\/li>\n
      2. Battery maintenance (if applicable)<\/strong>: If the bending machine has a battery – powered control system or other battery – operated components, remove the batteries and charge them fully. Store the batteries in a cool, dry place and check their charge periodically during storage.<\/li>\n<\/ol>\n

        II. Storage Environment<\/h3>\n

        The storage environment plays a significant role in the preservation of the 25t bending machine.<\/p>\n

        A. Temperature and Humidity<\/h4>\n
          \n
        1. Temperature control<\/strong>: The ideal storage temperature for a 25t bending machine is between 5\u00b0C and 40\u00b0C (41\u00b0F – 104\u00b0F). Extreme temperatures can cause problems such as oil thickening in the hydraulic system at low temperatures and accelerated wear of rubber seals at high temperatures.<\/li>\n
        2. Humidity control<\/strong>: High humidity can lead to rust and corrosion of the machine’s metal parts. Keep the storage area dry, with a relative humidity of less than 60%. You can use dehumidifiers or moisture – absorbing materials, such as silica gel, to control humidity.<\/li>\n<\/ol>\n

          B. Ventilation<\/h4>\n

          Proper ventilation is essential to prevent the accumulation of moisture and harmful gases in the storage area. Ensure that the storage space has adequate air circulation. This can be achieved by installing vents or fans.<\/p>\n

          C. Protection from the Elements<\/h4>\n
            \n
          1. Indoor storage<\/strong>: Whenever possible, store the 25t bending machine indoors. An indoor storage facility provides protection from rain, snow, sunlight, and other environmental factors that can damage the machine.<\/li>\n
          2. Covering<\/strong>: If indoor storage is not available, use a high – quality, waterproof cover to protect the machine. The cover should fit snugly and be made of a durable material that can resist UV rays and abrasion.<\/li>\n<\/ol>\n

            III. Storage Position<\/h3>\n

            The way you position the 25t bending machine during storage can also affect its condition.<\/p>\n

            A. Level Surface<\/h4>\n

            Place the machine on a flat and level surface. An uneven surface can cause stress on the machine’s frame, which may lead to deformation over time. You can use a spirit level to ensure that the machine is level.<\/p>\n

            B. Position of Moving Parts<\/h4>\n
              \n
            1. Bending dies<\/strong>: Leave the bending dies in a slightly open position to relieve stress on the hydraulic cylinders and the die – holding mechanisms. This helps to prevent premature wear of these components.<\/li>\n
            2. Rollers<\/strong>: If the machine has rollers, make sure they are not in contact with any hard objects or under excessive pressure. You can use blocks or supports to raise the machine slightly, reducing the load on the rollers.<\/li>\n<\/ol>\n

              IV. Security and Monitoring<\/h3>\n

              During storage, it’s important to ensure the security of the 25t bending machine and monitor its condition regularly.<\/p>\n

              A. Security<\/h4>\n
                \n
              1. Locking<\/strong>: Use locks to secure the machine and the storage area. This helps to prevent unauthorized access and theft.<\/li>\n
              2. Alarm system<\/strong>: Consider installing an alarm system in the storage area to deter potential thieves.<\/li>\n<\/ol>\n

                B. Monitoring<\/h4>\n
                  \n
                1. Regular inspections<\/strong>: Conduct regular inspections of the stored bending machine, at least once a month. Check for signs of rust, corrosion, or mechanical damage. Look for any leaks in the hydraulic or electrical systems.<\/li>\n
                2. Record – keeping<\/strong>: Keep a record of the inspection results, including any maintenance or repairs carried out during storage. This information can be useful when the machine is put back into service.<\/li>\n<\/ol>\n

                  V. Recommissioning<\/h3>\n

                  When you’re ready to use the 25t bending machine again after storage, follow these steps for a proper recommissioning.<\/p>\n

                  A. Inspection<\/h4>\n
                    \n
                  1. Visual inspection<\/strong>: Conduct a visual inspection of the machine to check for any visible damage that may have occurred during storage. Look for rust, loose parts, or signs of fluid leakage.<\/li>\n
                  2. Functional inspection<\/strong>: Test the machine’s functions, including the bending operation, hydraulic system, and electrical system. Make sure all the controls are working properly.<\/li>\n<\/ol>\n

                    B. Maintenance<\/h4>\n
                      \n
                    1. Replace filters<\/strong>: Replace the hydraulic filters and any other filters in the machine to ensure the proper functioning of the systems.<\/li>\n
                    2. Lubrication check<\/strong>: Check the lubrication levels of all the moving parts and replenish the lubricant if necessary.<\/li>\n<\/ol>\n

                      C. Training<\/h4>\n

                      <\/p>\n

                      If there are new operators who will be using the bending machine, provide them with proper training on the machine’s operation, safety procedures, and maintenance requirements.<\/p>\n

                      Corner Crimpring Machine<\/a> As a 25t bending machine supplier, I understand the importance of proper storage and maintenance. Our machines are designed to meet high – quality standards, but proper care is still essential to ensure their long – term performance. If you’re in the market for a reliable 25t bending machine or need more advice on storage and maintenance, I encourage you to contact us for a procurement discussion. We have a team of experts who can answer all your questions and provide you with the best solutions for your metal – bending needs.<\/p>\n

                      References<\/h3>\n